Shure SLXD14 Combo System with SLXD1 Bodypack and SLXD4 Receiver Band G58 - Tone Tailors

Shure

Shure SLXD14 Combo System with SLXD1 Bodypack and SLXD4 Receiver Band G58

$649.00
2721
210000003428
In stock
Ships within 1-2 Business Days
+ -

Product description

The SLXD14 Wireless System delivers transparent, 24-bit digital audio and rock-solid RF performance for a wide range of applications, from day-long presentations to nighttime performances. Operate up to 32 compatible systems per 44 MHz band, with easy setup and optional rechargeability accessories for wireless excellence, wherever required. Ships with SLXD4 single-channel receiver, SLXD1 bodypack transmitters and WA305 Premium Instrument Cable with antenna and rackmount accessories and 2 AA batteries.

 

Features

  • 1 - rackmount kit
  • 2 - 1/4 wave antennas
  • 1 - power supply
  • 2 - AA battery
  • 1 - vinyl bag
  • protective bumpers with 8 screws
Specifications
SLX Working Range:
  • Line of Sight: 
  • 100 m (300 ft) 
  • Note: Actual range depends on RF signal absorption,reflection and interference.
Audio Frequency Response:
  • 45–15000 Hz 
  • Note: Dependent on microphone type
Total Harmonic Distortion:
  • Ref. ±38 kHz deviation with 1 kHz tone 
  • <0.5%, typical
Dynamic Range:
  • >100 dB, A-weighted
Operating Temperature Range:
  • -18°C (0°F) to +50°C (122°F) 
  • Note: Battery characteristics may limit this range.
Transmitter Audio Polarity:
  • Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
SLX1 Audio Input Level:
  • Gain position 
  • mic: −10 dBV maximum 
  • 0dB: +10 dBV maximum 
  • –10dB: +20 dBV maximum
Gain Adjustment Range:
  • 30 dB
Input Impedance:
  • 1 MΩ
RF Output Power:
  • 10–30 mW 
  • varies by region
Pin Assignments:
  • TA4M: 
  • 1: ground (cable shield) 
  • 2: + 5 V Bias 
  • 3: audio 
  • 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Dimensions: 
  • 108mm x 64mm x 19mm (H x W x D)
Weight:
  • 81 g (3 oz.), without batteries
Housing: 
  • galvanized steel
Power Requirements:
  • 2 "AA" size alkaline or rechargeable batteries
Battery Life:
  • up to 8 hours (alkaline)
SLX4 Dimensions:
  • 42mm X 197mm X 134mm (H x W x D) Weight: 
  • 816 g (1 lb 13oz.)
Housing:
  • galvanized steel
Sensitivity:
  • -105 dBm for 12 dB SINAD, typical
Power Requirements:
  • 12–18 V DC @ 150 mA, supplied by external power supply (tip positive)
Configuration:
  • Impedance balanced
Maximum Audio Output Level:
  • Ref. ±38 kHz deviation with 1 kHz tone 
XLR connector:
  • –13 dBV (into 600 Ωload) 
  • 6.35 mm (1/4") 
  • connector: –2 dBV (into 3 kΩ load)
Impedance:
  • XLR connector: 200 Ω 
  • 6.35 mm (1/4") 
connector: 1 kΩ Pin Assignments
  • XLR connector: 1=ground, 2=audio, 
  • 3=no audio 
6.35 mm (1/4"") connector: 
  • Tip=audio, Ring=no audio, Sleeve=ground Image Rejection 
  • >70 dB, typical Volume Adjustment Range
  • 0 dB to -25 dB "

Review (0)

0 stars based on 0 reviews
FREE SHIPPING OVER $100
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »